DESIGN AND CONSTRUCTION OF THERMIONIC CONVERTER FOR RENEWABLE ENERGY RECYCLING
Babatunde. O. Jayeoba & Inioluwa O. Olowofila, July 2020, Published: 2020-11-08
Thermionic energy generation and conversion technique is one of the major ways to recycle waste energy for further utilization and applications. Environmental heat waste source can be utilized for renewable power generation to create friendly ecosystem by thermionic converter. This study design and construct a thermionic energy conversion system by thermally driving a PELTIER module with appropriate circuitry to create potential difference (electrical power output) between the electrodes when heat is applied to one of its ends through a thermionic emission process. The thermal energy as input to the system was varied over time in the range (150 – 320 oC), the corresponding instantaneous DC voltage generated by the system as a function of temperature were acquired in real time by data logger which recorded and logged in through a data logger for visualization of thermal/electrical characteristics analysis. The resulting voltage delivers electrical power to a load at a typical potential difference range of 5.0 – 7.2 volt and thermal efficiency of 20 – 60% per square centimetre of emitter surface which is also a function of emitter temperature (150 – 320 oC) is achieved. The thermionic system results were in agreement with the governing equation of Richardson–Dushman on thermionic emission as portrayed by the graphical analysis. The highest voltage of 7.2V was recorded at emitter temperature of 305 oC, beyond this point the system generated voltage shows no changes and remain constant. This study recommends amplification module for higher voltage applications.